Yes Installer For Linux (Ubuntu)

INFO

This installer was not founded by Yes 4G, YTL Communications and other company related to them. Thanks to y0nd13 -> http://y0nd13.blogspot.com where his blogpost giving me the idea to create this installer. So, credit to him. And this installer and the code use is made by me except for wpa_supplicant, gctwimax and the patch. Credit to the developer who made that.

TERMS AND CONDITION

I create this as free software but the source code is proprietary. So don`t ask for the source code. If you really need it, just do some reverse engineering and you might get it. I have contact Yes 4G about this installer and none of them respond to me. Then i my self will be releasing this application. You are free to distribute this application to others.

HOW TO

To install this, you need to run as super user. Navigate your terminal to this readme folder.

$ cd YOUR/PATH/TO/Yes\ Installer\ x86/ OR cd YOUR/PATH/TO/Yes\ Installer\ x64/
$ sudo ./install
[sudo] password for $USERNAME:

Then the installation will begin. Please connect to the internet before you proceed. After the installation is finished, you can connect to the internet using Yes Go using this command in terminal.

$ sudo connect4g start
[sudo] password for $USERNAME

Then you can connect with your Yes ID and Password. You can always close your terminal after the connection has established as it runs as background process. To disconnect from Yes, simply type:

$ sudo connect4g stop

Then you will be disconnected from Yes. This is the function that you can use with this application:

sudo connect4g -h : Help page
sudo connect4g --help : Help page
sudo connect4g start : Start Yes Connect
sudo connect4g stop : Stop Yes Connect

BUG AND ERROR REPORT

If you need to report about bugs and any other problems, simply go to my blogpost ( http://fikri.my/blog/yes-installer ) about this installer and report in comment section. Your feedback is needed to improve the application.

DOWNLOAD

This installer released in two flavour, 64 bit and 32bit. Feel free to choose them based on your OS.

32x - http://links.fikri.my/yes4g32bit

64x - http://links.fikri.my/yes4g64bit

THE SCREENSHOT OF THE TERMINAL APPLICATION

The installer interface

The help page

Connect interface. Sorry friends, i did not masking the password with asterisk.

ifconfig wimax0

Specially created menu.

 

 

If you like this article, please leave a comment or subscribe this page using RSS feed!!

25 Responses to "Yes Installer For Linux (Ubuntu)"

  • By Yes 4G Installer Untuk Linux 64bit dan 32 bit (Ubuntu) | Fikri[dot]my November 27, 2011 - 3:39 am

    [...] CloudFlare analytics upgrade */ /* */ HomeMy WorksYes Installer For Linux (Ubuntu)OMG Ubuntu PluginKategoriTeknologiAndroidAppleDunia SiberGadgetSoftwareGambar-GambarGambar [...]

    Reply
  • By Yes Go Kini Boleh Digunakan Oleh Para Pengguna Ubuntu Linux Dengan Mudah | Amanz November 27, 2011 - 4:23 am

    [...] mudah-alih mereka. Namun kini perkara tersebut diatasi oleh salah seorang pembangun bebas tempatan, membolehkan para pengguna Linux menggunakan Yes Go dengan mudah pada komputer [...]

    Reply
  • By Amir Hamzah November 27, 2011 - 1:37 pm

    Great job dude. It’s a shame for them actually…didn’t want to take this chance to cater what might be a potential customers from the open source market. Keep up the good work :-D

    Reply
  • By ted November 27, 2011 - 4:23 pm

    bravo geng!

    Reply
  • By zul November 28, 2011 - 2:10 am

    TQ very much dude for the apps! I really need it.

    Reply
  • By Latanya December 1, 2011 - 5:35 pm

    Can I clone your article to my blog? Thank you.

    Reply
  • By yoonkit December 2, 2011 - 4:53 pm

    Well done with this! It works. Just some corrections:
    1) the YES ID should indicate if we need to include the “@yes.my” part – because the Connect utility in Windows needs it. Otherwise strip it from the input.
    2) Slight misspelling in “Error conneting:”
    3) Any means of saving the login/password in a .dot file?

    Thanks very much for this!

    yk

    Reply
    • By Ahmad Fikrizaman December 2, 2011 - 5:00 pm

      1. You don`t need to write @yes.my because i have hard coded it.
      2. Ouch.. thanks for the spelling error. But i think it is just the spelling. I will release next Connect with GUI.
      3. Maybe in GUI version

      thanks for reporting

      Reply
  • By yondie December 2, 2011 - 5:50 pm

    Good job nice!!!!!! Well Done!!
    New blog entry from yondie is Twit2Bot via SMS

    Reply
  • By Dominic Low December 2, 2011 - 7:58 pm

    I have yet to try it but is there no way to do this without already having an internet connection? Yes is pretty much the only source of internets I have at this point.

    Reply
    • By Ahmad Fikrizaman December 2, 2011 - 11:16 pm

      yes.. buat you need to unpack the gct.tar.gz and read the installation note about the dependency and also how to install this manually..

      Reply
  • By anonymous December 3, 2011 - 6:38 pm

    I have try this, the installation part is good
    but when I want to connect it, the error occurs
    it shows

    * Unknown error. Please unplug and plug in back your yes Go
    *gctwimax: no process found
    *press [ENTER] to exit.

    I have try unplug and plugin back,but the problem still occur, need your help bro!

    Reply
    • By Ahmad Fikrizaman December 4, 2011 - 7:53 am

      looks like the computer did not detect yes go..

      try open the terminal and type “lsusb”

      if GCT Semiconductor, Inc. is not showing, i can`t help

      Reply
      • By anonymous December 4, 2011 - 1:00 pm

        but for “lsusb” command, this is the output:

        Bus 002 Device 006: ID 1076:7f00 GCT Semiconductor, Inc.
        Bus 002 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
        Bus 002 Device 003: ID 03f0:8407 Hewlett-Packard
        Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 001 Device 005: ID 0bda:0139 Realtek Semiconductor Corp.
        Bus 001 Device 004: ID 058f:a014 Alcor Micro Corp.
        Bus 001 Device 003: ID 13d3:3304 IMC Networks
        Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

        any idea???

        Reply
  • By anonymous December 6, 2011 - 1:32 am

    as per request bro, it shows:

    sudo: gctwimax: command not found

    Reply
  • By anonymous December 6, 2011 - 1:47 am

    i just try to reinstall it, but i get the error msg:

    * Internet connected. Continue to install..
    * Updating package and installing dependency..

    W: GPG error: http://download.virtualbox.org maverick Release: The following signatures couldn’t be verified because the public key is not available: NO_PUBKEY 54422A4B98AB5139
    W: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/contrib/source/Sources 404 Not found

    W: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/non-free/source/Sources 404 Not found

    E: Some index files failed to download. They have been ignored, or old ones used instead.

    * Done. Wait for 5 seconds before continue..
    * Decompressing required library..
    * Decompressed, Patching..
    * Done patching. Making file…
    * Done installing wpa_supplicant.
    * Installing YES Driver…

    cp: cannot create regular file `/usr/lib/dbus-1.0/include/dbus/dbus-arch-deps.h’: No such file or directory
    cp: cannot stat `./gctwimax’: No such file or directory
    make: *** [install] Error 1
    * Done ALL!!

    ***for your information, i use ubuntu 11.04

    Reply
  • By nazri December 24, 2011 - 11:40 pm

    sory frenz…. im newbie. so can u explain detail.. when i want to install. it show no such file or directory. plez help me… :)

    Reply
  • By lr5 December 28, 2011 - 4:18 pm

    Thanks Fikri d genius one. got it work at last. i also came across the
    * Unknown error. Please unplug and plug in back your yes Go

    then just put in sudo connect4g stop
    eventho it doesnt connect before
    and pull out the broadband and put in another usb port of my laptop
    and start as normal with sudo connect4g start

    and walaaa. Thanks dude

    Reply
  • By pummkin February 2, 2012 - 2:57 pm

    Wonderful work! I would like to be informed if you do come up with a hack for connecting the Android OS in a tablet with the YES4g USB dongle. Currently only the 3G Huawei modem’s hack had been created. Thanks!

    Reply

Leave a reply

CommentLuv badge